SALE at GMRS/Ham two-way radio interface boards online store!!! https://www.gmrstwowayradio.com/store

Welcome- To ask questions or to view help information about GMRS two-way radio gear, you must register (it's free) before you can post or view!…thank you!!

What are the plastic stand-off for?

Here is where you will find FAQ's/help/setup and information on the Retevis RT97S (with data port) and Midland MXR10 interface board
Locked
User avatar
Gambler
Site Admin
Posts: 360
Joined: Tue Mar 14, 2023 12:18 pm
Location: Wisconsin
Contact:
Contact Gambler

What are the plastic stand-off for?

Post by Gambler »

This is need, so the interface board will be at the same level as the repeater DB9 connector. There are 4 holes, one in each corner on the interface board, this is where you will put them on. It being plastic, you can trim them to the height you want.

Image
Top
Locked

Return to “Retevis RT97S (with data port) and Midland MXR10 interface board FAQ's/help/setup”